Load safety information The Z5399 VP Mounting bracket is designed to support one YiP loudspeaker (Yi7P or Yi10P). No additional loads must be added. The bracket must only be used in an upright position or suspended vertically as shown in the graphic opposite.
1. Slightly slacken the fixing screws [F]. 2. Set the loudspeaker to the required vertical angle. 3. Retighten the fixing Screws [F]. Horizontal aiming The horizontal aiming is set at the loudspeaker stand adapter or the TV spigot assembly. d&b Z5399 Mounting instructions 1.1 en...
When out of use the rigging components must be disposed of in accordance with the national environmental regulations. Ensure that damaged rigging components are disposed of in a way that they cannot be used again. d&b Z5399 Mounting instructions 1.1 en...