Load safety information NOTICE! The Z5460 AL Stand adapter is designed to carry the weight of one (1) AL60/ AL90 or ALi60/ALi90 cabinet mounted on the Z5458 AL Base plate. 1.3 Intended use...
4. Fold out and remove the Splay link of the cabinet. ↳ The tilt angle of the cabinet can be applied using the Splay link of the Base plate. For these purposes, please refer to the Z5458 Rigging manual. d&b Z5460 Mounting instructions 1.1 en...
When out of use the rigging components must be disposed of in accordance with the national environmental regulations. Ensure that damaged rigging components are disposed of in a way that they cannot be used again. d&b Z5460 Mounting instructions 1.1 en...