HIKVISION DS-2CD852 Series User Manual page 42

Input new IP address, subnet mask, and port number, and click 'save' button. If a dialog pops
up, showing 'saved successfully', that means you have modified the configuration information; if
'saving failed' turns up, click the 'cancel' button to quit it.
4. Recovering default password
You can reset the password of the super user as '12345' in case of can not remembering
administrator's password.
Input certain validate code into 'recover device default password' column, and click 'OK' to
finish the administrator's password initiating.
Note: validate code is sent by the technicians after you provide the device Serial NO.
41