RIDGID K-750 Operating Instructions Manual
Drain cleaning machine
Hide thumbs
Also See for K-750:
- Manual (72 pages) ,
- Operator's manual (18 pages) ,
- Operating instructions manual (52 pages)
Related Manuals for RIDGID K-750
Summary of Contents for RIDGID K-750
- Page 2 See “Using Machine With A Front Guide Hose” if using a REV can damage the cable. guide hose. Operation Neutral The K-750 Drain Cleaning Machine is available in two Full Full different feed configurations, either manual feed or AUTO - Advance Retrieve FEED.
- Page 3 (this may feel like the cable is starting to twist or squirm). Having a hand on the cable al- Figure 14 – Operating the K-750 using the AUTOFEED lows you to feel this wind up and control the cable. If the...
- Page 4 K-750 Drain Cleaning Machine Handling A Stuck Tool Pay attention to the cable during retrieval as the cable end can still become stuck. If the tool stops turning and the cable cannot be pulled back from the blockage, immediately release the foot Place the FOR/OFF/REV switch in the OFF position.
- Page 5 K-750 Drain Cleaning Machine When using a front guide hose, pay attention how the guide hose feels in your hand and watch the drum ro- tation. Because the guide hose is over the cable, there is less sensitivity to the loading of the cable, and it is harder to tell if the tool is rotating or not.
-
Page 6: Maintenance Instructions
K-750 Drain Cleaning Machine 4. Use " wrench to remove the bolt that holds the 6. Reverse steps 2-5 to reassemble a drum to the K-750 frame. Exercise care when standing the machine drum to the machine frame. See Figure 18. -
Page 7: Machine Storage
To reduce the risk of serious injury, only use ac- cessories specifically designed and recommended Replacement Catalog Model for use with the RIDGID K-750 Drain Cleaning Ma - Description Blade(s) Holder chine, such as those listed below. Other Ac ces -...