Sony ZV-1 Service Manual page 91

Installation
1. Solder the four soldering places.
2. Fix the flexible board to the two hooks and boss.
Iris (IR1710)
Flexible board
Shutter (SH1710)
3. Fix the flexible board to the four hooks and boss.
Iris (IR1710)
Flexible board
Shutter (SH1710)
4. Set the three Iris springs.
Note
Be careful not to fall down the Iris Springs.
5. Attach the Iris (IR1710) to 2nd Group Frame, then fix the three claws.
6. Visually inspect the iris spring from the holes, confirm that the stick has not fall over.
Iris (IR1710)
Claw
Solders
Hooks
2nd Group Frame
Claws
Iris springs
Hole
2nd Group Frame
Sony CONFIDENTIAL
For Authorized Servicer
Boss
Hooks
Hook
Boss Hook
Hole
Hole
.
83
SYS SET