Sy Board Section-1 - Sony ZV-1 Service Manual

4-2-2. SY Board Section-1

[ 6 ] Lens cushion (under) (64500)
Refer to "Notes on Assembling the
Lens Cusion (Under) (64500)".
[ 4 ] Peel off the flexible board
Refer to "Notes on Assembling
the SY Insulation Sheet (64500)(1)".
[ 8 ] IMG radiation sheet (64500)
Refer to "Notes on Assembling the
IMG Radiation Sheet (64500)".
Notes on Assembly
Assembly order 1
Notes on Assembling the Sheets of the SY Heat Sink Block
Attach the SY heat transfer sheet (64500) and the SY shield sheet (64210) as shown in figure.
SY heat transfer
sheet (64500)
0 to 0.5 mm
0 to 0.5 mm
SY heat sink (64500)
[ 2 ] RL-1066 flexible board
Refer to "Notes on Assembling the
RL-1066 Flexible Board".
[ 13 ] SY heat sink block
Refer to "Notes on Assembling the
Sheets of the SY Heat Sink Block".
[ 10 ] screw
#209 (M1.4 X 3.5)
(0.12 ± 0.01 N·m)
[ 7 ] Interception sheet (64200)
Refer to "Notes on Assembling
the Interception sheet (64200)".
SY sheild sheet (64210)
[ 12 ] Jack holder (64210)
[ 9 ] screw
#209 (M1.4 X 3.5)
(0.12 ± 0.01 N·m)
[ 3 ] Cushion (64210) (GND)
Refer to "Notes on Assembling
the Cushion (64210) (GND)".
[ 11 ] screw
#290 (1.4 X 5.0) (Tapping)
(0.12 ± 0.01 N·m)
[ 1 ] BT HNS guard (88300)
Refer to "Notes on Assembling
the BT HNS Guard (88300)".
Adhesive
[ 5 ] SY insulation sheet A (64500)
Refer to "Notes on Assembling
the SY Insulation Sheet (64500)(2)".
0 to 1.0 mm
0 to 1.0 mm
SY heat sink (64500)
Sony CONFIDENTIAL
For Authorized Servicer
27
SYS SET