Bt Holder Section - Sony ZV-1 Service Manual

4-2-5. BT Holder Section

[ 5 ] Heat sheet (F) (64200)
Refer to "Notes on Assembling
the Heat Sheet (F) (64200)".
[ 4 ] MS radiation sheet (64500)
Refer to "Notes on Assembling
the MS Radiation Sheet (64500)".
(Note 2)
[ 13 ] BT holder assy (64500)
Note 1
Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type.
Dispose of used batteries according to the instructions.
電池の交換は， 正しく行わないと破裂する恐れがあります。
電池を交換する場合には必ず同じ型名の電池又は同等品と交
換してください。
使用済み電池は， 取扱指示に従って処分してください。
[ 2 ] Turn the BT block
[ 7 ] BT heat sink (64200)
Refer to "Notes on Assembling
the BT Heat Sink (64200)".
[ 8 ]
Refer to "Notes on Assembling
the BT-2030 Flexible Board (1)(2)".
[ 3 ]
Refer to "Notes on Assembling
the BT Block (1)(2)".
[ 6 ] Adhesive sheet (WIFI) (64210)
Refer to "Notes on Assembling
the Adhesive Sheet (WIFI) (64210)".
[ 11 ] screw
#115
(0.12 ± 0.01 N·m)
[ 12 ] Strap base plate (64500)
[ 15 ] Battery terminal board
[ 16 ] Rechargeable battery
(Note 1)
[ 17 ] BT-2030 flexible board
Sony CONFIDENTIAL
For Authorized Servicer
(1.4 X 3.5) (Tapping)
[ 9 ] screw
#248 (M1.4 X 3.5)
(0.12 ± 0.01 N·m)
[ 10 ] Strap R (64500)
[ 14 ] BT insulating sheet (64210)
Refer to "Notes on Assembling
the BT Insulating Sheet (64210)".
[ 1 ] screw
#280 (M1.4 X 4.5)
(0.12 ± 0.01 N·m)
41
SYS SET