Precaution On Replacing The Sy-1112 Board; Angular Velocity Sensor - Sony ZV-1 Service Manual

2-6. Precaution on Replacing the SY-1112 Board

2-6-1. Angular Velocity Sensor

Before replacing the board with a repairing board, be sure to record the sensitivity indicated on the angular velocity sensor on the
repairing board.
The recorded sensitivity indication must be stored in the repairing board.
Method of the angular velocity sensor sensitivity writing:
Start the Adjust Manual in the Adjust Station and execute the "Angular velocity sensor sensitivity adj" on the ADJUST tab.
Note
The sensitivity of the angular velocity sensor is indicated only on the repairing board, but is not indicated on mass production boards.
Sony CONFIDENTIAL
For Authorized Servicer
12
SYS SET