Honeywell CNI4 Quick Start Manual page 7

Step 6: Configure the Cloud Link 4G Modem
1. Disconnect the female connector of the USB-to-serial cable that was previously
connected to the Pulse Accumulator.
2. Insert the male connector, so far unused, of the USB-to-serial cable into the female
RS232 connector slot on the Cloud Link.
3. Click Connect to connect to the Cloud Link.
4. Close the warning pop-up, enter site name, and click Save.
5. Wait for the dashboard to load. Click the center of the Time Sync widget and perform a
time synchronization between the Cloud Link and the PC by clicking Sync.
CNI4 Quick Start Guide 7