Honeywell CNI4 Quick Start Manual page 3

Step 2: Power-up the CNI4 - battery or external power supply
To connect the battery packs to the Cloud Link 4G Modem
1. Install the Cloud Link battery packs with
positive terminal on top.
2. Tie wrap the batteries to the metal plate.
3. Connect the female connector from the first
battery to the male connector of the second
battery.
4. Remove the warning label as shown in the
picture, and then remove the dummy battery
connector plug on the Cloud Link.
5. Attach the connector from second battery to
the Cloud Link battery connector.
6. Wrap the extra wire using a cable tie.
To connect the battery pack to the Pulse Accumulator
1. Install the Pulse Accumulator battery pack on the left side of the battery plate.
2. Connect the Pulse Accumulator battery pack to the Y cable.
3. Wrap the extra wire using a cable tie
The Pulse Accumulator
The Cloud Link 4G Modem battery packs
CNI4 Quick Start Guide
The Cloud Link 4G
battery pack Modem battery packs
connected in parallel
Y cable for the Pulse Accumulator
battery pack
Batteries connecting to the
Cloud Link 4G Modem
Cloud Link 4G Modem
battery connector
3