Specifications; Intended Use - Makita DTDA040 Series Instruction Manual

SPECIFICATIONS

Model:
Fastening capacities
Maximum fastening torque
Torque range
No load speed (RPM)
Impacts per minute
Rated voltage
Overall length
Net weight
• Due to our continuing program of research and development, the specifications herein are subject to change
without notice.
• Specifications may differ from country to country.
• The weight may differ depending on the attachment(s), including the battery cartridge. The lightest and heavi-
est combination, according to EPTA-Procedure 01/2014, are shown in the table.
Applicable battery cartridge and charger
Battery cartridge
Charger
• Some of the battery cartridges and chargers listed above may not be available depending on your region of
residence.
WARNING:
Only use the battery cartridges and chargers listed above. Use of any other battery cartridges
and chargers may cause injury and/or fire.
Symbols
The followings show the symbols used for the equip-
ment. Be sure that you understand their meaning before
use.
Read instruction manual.
Only for EU countries
Ni-MH
Do not dispose of electric equipment or
Li-ion
battery pack together with household waste
material!
In observance of the European Directives,
on Waste Electric and Electronic
Equipment and Batteries and Accumulators
and Waste Batteries and Accumulators
and their implementation in accordance
with national laws, electric equipment and
batteries and battery pack(s) that have
reached the end of their life must be col-
lected separately and returned to an envi-
ronmentally compatible recycling facility.

Intended use

The tool is intended for screw driving in wood, metal
and plastic.
Standard bolt
High tensile bolt
DTDA040 DTDA070
M5 - M10
M5 - M8
35 N•m 65 N•m
Approx. Approx.
3 - 20 N•m 5 - 40 N•m
-1
0 - 2,400 min 0 - 2,500 min
-1
0 - 3,700 min
139 mm
1.1 - 1.4 kg
BL1415N / BL1415NA / BL1430 / BL1430B / BL1440 / BL1450 /
BL1460A / BL1460B
DC18RC / DC18RD / DC18RE / DC18SD / DC18SE / DC18SF /
Noise
The typical A-weighted noise level determined accord-
ing to EN62841-2-2:
Model DTDA040
Sound pressure level (L
Sound power level (L
Uncertainty (K) : 3 dB(A)
Model DTDA070
Sound pressure level (L
Sound power level (L
Uncertainty (K) : 3 dB(A)
Model DTDA100
Sound pressure level (L
Sound power level (L
Uncertainty (K) : 3 dB(A)
Model DTDA140
Sound pressure level (L
Sound power level (L
Uncertainty (K) : 3 dB(A)
NOTE: The declared noise emission value(s) has
been measured in accordance with a standard test
method and may be used for comparing one tool with
another.
NOTE: The declared noise emission value(s)
may also be used in a preliminary assessment of
exposure.
2 ENGLISH
DTDA100
M5 - M12
M5 - M10
95 N•m
Approx.
6 - 65 N•m 18 - 80 N•m
-1
0 - 2,700 min
0 - 3,300 min
D.C. 14.4 V
146 mm
1.2 - 1.4 kg 1.2 - 1.5 kg
DC18SH
) : 90 dB(A)
pA
) : 101 dB (A)
WA
) : 92 dB(A)
pA
) : 103 dB (A)
WA
) : 94 dB(A)
pA
) : 105 dB (A)
WA
) : 94 dB(A)
pA
) : 105 dB (A)
WA
DTDA140
M6 - M16
M6- M12
140 N•m
Approx.
-1
-1