Makita TD022D Series Instruction Manual
Hide thumbs
Also See for TD022D Series:
- Instruction manual (65 pages) ,
- Instruction manual (22 pages) ,
- Instruction manual (45 pages)
Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Makita TD022D Series
Summary of Contents for Makita TD022D Series
- Page 1 INSTRUCTION MANUAL Cordless Impact Driver TD022D Read before use.
-
Page 2: Specifications
SPECIFICATIONS Model: TD022D Fastening capacities Machine screw 3 mm - 8 mm Standard bolt 3 mm - 8 mm High tensile bolt 3 mm - 6 mm No load speed 0 - 2,450 min Impacts per minute 0 - 3,000 min Overall length With straight shape 282 mm... -
Page 3: Safety Warnings
Prevent unintentional starting. Ensure the SAFETY WARNINGS switch is in the off-position before connecting to power source and/or battery pack, picking up or carrying the tool. Carrying power tools with General power tool safety warnings your finger on the switch or energising power tools that have the switch on invites accidents. WARNING: Remove any adjusting key or wrench before Read all safety warnings, instruc-... - Page 4 Battery tool use and care Use auxiliary handle(s), if supplied with the tool. Loss of control can cause personal injury. Recharge only with the charger specified by the manufacturer. A charger that is suitable for Hold power tool by insulated gripping sur- one type of battery pack may create a risk of fire faces, when performing an operation where the when used with another battery pack.
-
Page 5: Functional Description
CAUTION: Always insert it until it locks in causing fires, personal injury and damage. It will place with a little click. If not, it may accidentally also void the Makita warranty for the Makita tool and fall out of the tool, causing injury to you or someone charger. around you. Tips for maintaining maximum... - Page 6 NOTICE: Change the direction only after the tool comes to a complete stop. Changing the direction of rotation before the tool stops may damage the tool. To start the tool, first move the lock lever to the unlocked position to release the switch. ► 1 . Lamp 2. Lock lever 3. Switch NOTE: Use a dry cloth to wipe the dirt off the lens of the lamp.
-
Page 7: Operation
Procedure 1 ► 1 . Driver bit 2. Sleeve To install the driver bit, pull the sleeve in the direction of the arrow and insert the driver bit into the sleeve as far as it will go. ► 1 . Straight shape 2. Pistol shape Then release the sleeve to secure the driver bit. The tool can be used in two ways; a straight shape and Procedure 2 a pistol shape which are selectable according to the conditions of workplace and screwdriving. - Page 8 High tensile bolt Using the tool as a hand screwdriver N•m (kgf•cm) (204) (153) (102) (51) Switch off the tool. Move the lock lever to the locked position Turn the tool. 1. Fastening time (second) 2. Fastening torque 3. Proper fastening torque corresponding to each bolt NOTICE: Use the tool with a fastening torque less diameter than 12.5 N•m. NOTICE: Hold the tool firmly and place the point of the driver bit Do not use the tool for work requiring in the screw head.
-
Page 9: Maintenance
NOTICE: Never use gasoline, benzine, thinner, alcohol or the like. Discoloration, deformation or cracks may result. To maintain product SAFETY and RELIABILITY, repairs, any other maintenance or adjustment should be performed by Makita Authorized or Factory Service Centers, always using Makita replacement parts. OPTIONAL ACCESSORIES CAUTION: These accessories or attachments are recommended for use with your Makita tool specified in this manual. The use of any other... - Page 12 Makita Europe N.V. Jan-Baptist Vinkstraat 2, 3070 Kortenberg, Belgium Makita Corporation 3-11-8, Sumiyoshi-cho, Anjo, Aichi 446-8502 Japan 885535A226 www.makita.com 20160624...