Department Control Mode (For Sf5600 Only); Registering Department Code - Samsung SF5500 Installation And Operation Manual

D E P A R T M E N T
CONTROL MODE
(For SF5600 only)
ENTER MASTERCODE
_
RE-ENTER MASTER
CODE _
MASTER CODE
REGISTERED !
1 : SET 2 : PRINT
3 : MANAGEMENT
ENTER 2-digit
DEPT. NO [00-49]
SAMSUNG ELECTRONICS CO., LTD
For usage management, your fax machine is equipped with Department
Control Mode. This is a security function, and can restrict use with Department
Codes. If codes do not match, this mode prevents operation. You can also find
out how long and by which department your fax machine was used.

REGISTERING DEPARTMENT CODE

Before using the department control mode, you have to register the
master code, and the department code and ID name for each
department who will share the fax machine.
Master code: 4 to 8-digit security code for the master who manages
to control all departments registered.
Department number: 2-digit number to manage that department.
Department code: 4-digit number for the department. Unless
correct department code is entered, fax machine's operation except
automatic receiving cannot be accessed.
1
Press FUNCTION, and START.
2
Enter the desired Master code using the number keypad, then
press YES.
When you purchase the unit, the Master code is not fixed.
Enter any 4 to 8-digit number you want to use as the Master
code.
3
Re-enter the Master code to confirm the code is correct, then
press YES.
MASTERCODE REGISTERED ! appears briefly in the display.
If you have not entered the same code as the code entered in
Step 2, CODE MISMATCH ! TRY AGAIN appears in the
display. Try again with the correct code.
Once you have registered the Master code, the message shown
in Step 3 does not appear. You can skip over Step 3 and proceed
to Step 4.
4
Press 1.
5
Enter 2-digit Department number (between 00 to 49) using the
number keypad, then press YES.
4 - 3 1