Install Drum Unit - Samsung SF5500 Installation And Operation Manual

1 - 8

3 INSTALL DRUM UNIT

The drum unit is photosensitive. Exposing it to light may damage
the drum and result in poor print quality. Do not open the drum
unit's protective bag until you have read the following instructions
and are ready to install the drum.
Warning!
• Do not expose the drum unit to direct room light or sunlight for
more than a few minutes.
• Do not place the drum unit near a window or in an area subject
to high heat(above 122˚F) or high humidity (above 80% RH).
• Do not touch the drum surface. Lift the drum unit by the handle
only.
• Keep the drum unit away from dust and dirt.
1
Remove the adhesive tape and take the drum unit out of its
protective bag.
2
Lower the top cover half-way. It makes the drum unit easier to
install.
3
Holding the handle of the drum unit, fit the narrow tabs
(marked by green arrow label) at both ends of the unit into the
grooves (marked by green arrow label) of the machine as
shown.
SAMSUNG ELECTRONICS CO., LTD