One-Touch Programs - Samsung SF5500 Installation And Operation Manual

SET AUTODIALER
or PROGRAM ? Y/N
SET ONE-TOUCH
DIAL ?
PROGRAM
OPERATION ? Y/N
PRESS ONE-TOUGH
KEY TO PROGRAM
PROGRAM TO ONE-
TOUCH KEY12? Y/N
1 : TX 2 : POLL
3 : CONF. 4 : RELAY
4 - 2 0

ONE-TOUCH PROGRAMS

Complicated or frequently used operations can be stored as One-
touch programs, which can be initiated by pressing the
corresponding One-touch key.
Programmable operations are:
• Delay Transmission
• Delay Polling Reception
• Confidential Transmission
• Relay Transmission Request
N o t e : Only 5(SF5500/SF5500M), 10(SF5600) One-touch keys may be
programmed.
To program a particular operation into a One-touch key, follow the
procedure below.
1
Press FUNCTION, then 4.
2
Press YES.
3
Press NO repeatedly until PROGRAM OPERATION ? appears
in the display.
Y/N
4
Press YES.
5
Press One-touch key to which you wish to grogram the desired
function.
6
The fax machine displays the number of the selected One-touch
key. Press YES to confirm it.
The fax machine prompts you briefly to enter a designated
function number.
7
Then the fax machine prompts you to select the desir e d
function.
Enter the number of the desired function.
For example, press 1 to program a Delay transmission.
SAMSUNG ELECTRONICS CO., LTD