Hint on Handing the Recording
Paper
• Do not use creased, folded,
wrinkled, or damp sheets of paper
Do not load the
paper above this
line
SAMSUNG ELECTRONICS CO., LTD
REPLACING THE RECORDING PAPER
The recording paper must be replaced when it is visibly low in the
cassette, or when the unit prompts NO PAPER through the LCD
display.
To replace the recording paper:
1
Remove the paper cassette by pulling it out of the cassette port.
2
Remove the paper cassette cover, then press down and latch the
metal plate in the cassette.
3
Fan the paper and load it in the cassette with the side to be
printed facing up.
Make sure that the stack of paper does not exceed the limit
mark on the side of the cassette.
4
Gently press the upper corners of the paper down under the
cassette tabs.
Make sure that the paper stack stays beneath the tabs as shown
at left.
5
Replace the cassette cover and slide the paper cassette into the
port until it stops.
5 - 1 9