H 408x BM
Cause:
Different placement (appliances side by side, one on top of another); different
light reflection.
Remedy:
Adjust using the "brightness" and "contrast" programming functions (refer to
Section 040-4.1).
3.17
Buzzer Tone Too Loud/Too Soft
Cause:
The buzzer can be programmed.
Remedy:
See Section 040-4.1.
3.18
System Lock Cannot Be Activated
Symptom:
The icon is not in the display.
Cause:
To accept or not accept the system lock can be programmed.
Remedy:
See Section 040-4.1.
3.19
Weight in Pounds
Cause:
Weight units can be programmed.
Remedy:
See Section 040-4.1.
3.20
Temperature in °C/°F
Cause:
The temperature format can be programmed.
Remedy:
See Section 040-4.1.
3.21
Appliance Does Not Heat
Cause:
Demo mode is activated.
Remedy:
Deactivate the demo mode. (Not applicable in all models.)
3.22
Fuse Trips
Cause:
The door safety switch is defective.
Remedy:
1. Check all door contact safety switches (refer to Figure 011-8).
2. Replace the door lock with the defective safety switch (refer to Section 011-4.8).
3. Replace fuse.
69
Technical Information