Figure 011-9: Right Safety Switch 3F6/6 And Screw - Miele H 408 BM Series Technical Information

Technical Information

Figure 011-9: Right Safety Switch 3F6/6 and Screw

9. Test the continuity of right safety switch 3F6/6 (Figure 011-9, Item 1)
using an ohmmeter. If the ohmmeter beeps, then the switch is closed.
10. Use a metric 8-millimeter socket wrench to turn the set screw clockwise
(Figure 011-9, Item 2) until the switch opens (ohmmeter no longer beeps).
Then turn the switch an additional quarter-turn.
11. Test the continuity of left safety switch 1F6/6 (Figure 011-8, Item 1) using
an ohmmeter. If the ohmmeter beeps, then the switch is closed.
12. Use a metric 8-millimeter socket wrench to turn the set screw clockwise
until the switch opens (ohmmeter no longer beeps). Then turn the switch
an additional quarter-turn.
13. Open the door.
14. Remove the magnetic strips.
15. Close the door. The ohmmeter should beep (indicating continuity).
Danger!
After the procedure is completed, as a matter of standard practice, check
the oven for a tight seal with a microwave leak detector, paying particular
attention to the door and the housing edges.
24
H 408x BM
1 Safety switch
2 Set screw