Door Lock Removal; Figure 011-4: Ducting And Door Latch; Figure 011-5: Wire Bracket And Hooks - Miele H 408 BM Series Technical Information

Technical Information
9. Slightly lift the front of the ducting (Figure 011-4, Item 3).
10. Open the appliance door.
11. Lift up the door lock and remove the latch (Figure 011-4, Item 4).

Figure 011-4: Ducting and Door Latch

12. Turn the wire bracket by 90°. See Figure 011-5.
13. Pull the wire bracket out of the hooks in the door latch.

Figure 011-5: Wire Bracket and Hooks

Danger!
After installing the door lock, adjust the door switches. See Section 011-4.9.
After installation is completed, as a matter of standard practice, check the
oven for a tight seal with a microwave leak detector, paying particular attention
to the door and the housing edges.
4.8

Door Lock Removal

1. Remove the appliance from its cabinet; see Section 011-4.3
2. Remove the screws securing the appliance lid. Remove the lid.
Danger!
Before performing any service or repair work, discharge the high-voltage
capacitor. See Section A-2.
20
H 408x BM