Technical Information
3.10
Oven Light Goes Out/Does Not Go Out
Cause:
The oven light can be programmed.
Remedy:
See Section 040-4.1.
3.11
Modes in the Main Menu Were Changed
Cause:
The modes in the main menu can be programmed.
Remedy:
The first four modes in the main menu can be replaced with other modes or
programs that are used more often.
3.12
Cooking Process Does Not Start
Cause:
Start was set to 'manual'.
Start can be programmed as automatic or manual. If start was set to 'manual',
then the start of a cooking process must be confirmed manually.
Remedy:
Set start to 'automatic'.
3.13
Recommended Temperatures Are Changed
Cause:
The recommended temperatures can be programmed.
Remedy:
See Section 040-4.1.
3.14
Display Dims
Cause:
The display can be programmed.
Remedy:
See Section 040-4.1.
3.15
Display Is Too Bright/Too Dark
Cause:
The display brightness can be programmed.
Remedy:
See Section 040-4.1.
3.16
Displays Look Different
Symptom:
The displays of different appliances with Navitronic controls (H 4000,
H 4000 BM, DG 4050) look different.
68
H 408x BM