Mount Base; Mounting The Module; Figure 3-1 Mounting The Option Module; Table 3-1 Mount Bases Applicable To The Fl.net Module - Hitachi FL.NET User Manual

3 FL.NET MODULE INSTALLATION

3.1 Mount Base

The FL.NET module can be mounted in the mount bases shown in Table 3-1.

Table 3-1 Mount Bases Applicable to the FL.NET Module

Name
4-slot mount base
8-slot mount base

3.2 Mounting the Module

Mount the option module in an option slots (slot number 0 through 7) on the mount base as
shown below.
There are no specific rules about the mounting position or unoccupied slots.
This model-LQE702 FL.NET module may not be mounted on the same mount
base in conjunction with any other FL.NET module of models LQE500 or
LQE502 and any EQ.LINK module of model LQE701.
Model
HSC-1540
HSC-1580
Mount base
Power supply module

Figure 3-1 Mounting the Option Module

Power supply + LPU + 4 slots (option, for I/O)
Power supply + LPU + 8 slots (option, for I/O)
NOTICE
Option slots
0 1 2 3 4 5 6 7
LPU module
3-2
Specification
Option module