Hitachi FL.NET User Manual page 139

5 USER GUIDE
Message transmission service
number
Transmission destination node
number
Error code storage address
Transmission data storage
address
Data word count
Transmission message TCD
(*) For the relationship between real address on LPU (memory address) and symbol
name such as XW000, see "Table 2-5 Virtual Address Spare and Symbol
Names." "Memory address" in table is the address to be specified.
[Return code] (for C mode handler only)
0 (0x00000000): Normal termination
-1 (0xFFFFFFFF): Parameter abnormality exists or the handler is busy processing another
-2 (0xFFFFFFFE): Specifies real address (0x01000000 to 0xFFFFFFFE) on CMU at error
Parameter
message. Error code is stored in area which specified error code storage
address. For content and measure of error code, see "Table 7-3 List of
Detectable Codes."
code storage address or transmission data storage address. Please review
the specified address.
Input range
18 (only when a mathematical/logical function
is used)
1 to 255
Specify a real address (even-numbered
address) on the LPU. (*)
0 to 1,024 (specified in bytes)
0 to 59999 (with the exception of the
following)
1000, 1001, 1200, 1201
5-84