Cisco SPA Series User Manual page 4

Hosted VoIP Handset User Guide – Cisco SPA Series
Call functions and general use
Adjusting Volume:
The default volume set in the phone may not be appropriate, to change do
the following:

Ringer: while phone is inactive, press the volume up/down button to
the desired volume, press the save soft key to set the volume.

In call volume: While a call is active, press the volume up/down
button to the desired volume, press the save soft key to set the
volume.
Answering a Call:
To answer a call, when phone is ringing;

Pick up the handset, or

Press the Speaker button (speaker button will glow green), or

Press the Headset button (headset button will glow green)
Ending a Call:

If you are using the handset, hang up

If you are using the speaker, press the speaker button

If you are using the headset, press the headset button
Initiating a Call:
To initiate a call do the following
1. a)
b)
c)
2. Dial the destination number on the keypad, wait for timeout or
press the dial soft key to dial immediately.
Pick up the handset, or
Press the Speaker button, or
Press the Headset button
4