GE AF-650 GP Programming Manual page 163

[51] Comparator 5
[60] Logic rule 4
[61] Logic rule 5
[70] Logic Controller Time-out 3
[71] Logic Controller Time-out 4
[72] Logic Controller Time-out 5
[73] Logic Controller Time-out 6
3
[74] Logic Controller Time-out 7
[75] Start command given
LC-52 Logic Controller Action
Array [20]
Option:
[0] * DISABLED
[1] No action
[2] Select set-up 1
[3] Select set-up 2
[4] Select set-up 3
[5] Select set-up 4
[10] Select preset ref 0
[11] Select preset ref 1
[12] Select preset ref 2
[13] Select preset ref 3
[14] Select preset ref 4
[15] Select preset ref 5
[16] Select preset ref 6
[17] Select preset ref 7
[18] Select Accel/Decel 1
[19] Select Accel/Decel 2
[20] Select Accel/Decel 3
[21] Select Accel/Decel 4
[22] Run
[23] Run reverse
[24] Stop
[25] Qstop
[26] Dcstop
[27] Coast
162
Function:
Select the action corresponding to the LC event. Actions are executed when the corresponding event
(defined in par. LC-51 Logic Controller Event) is evaluated as true. The following actions are available for
selection:
*DISABLED [0]
No action [1]
Select set-up 1 [2] - changes the active set-up (par. K-10) to '1'.
Select set-up 2 [3] - changes the active set-up (par. K-10) to '2'.
Select set-up 3 [4] - changes the active set-up (par. K-10) to '3'.
Select set-up 4 [5] - changes the active set-up (par. K-10) to '4'. If the set-up is changed, it will merge with
other set-up commands coming from either the digital inputs or via a Network.
Select preset reference 0 [10] – selects preset reference 0.
Select preset reference 1 [11] – selects preset reference 1.
Select preset reference 2 [12] – selects preset reference 2.
Select preset reference 3 [13] – selects preset reference 3.
Select preset reference 4 [14] – selects preset reference 4.
Select preset reference 5 [15] – selects preset reference 5.
Select preset reference 6 [16] – selects preset reference 6.
Select preset reference 7 [17] - selects preset reference 7. If the active preset reference is changed, it will
merge with other preset reference commands coming from either the digital inputs or via a Network.
Select ramp 1 [18] - selects ramp 1.
Select ramp 2 [19] - selects ramp 2.
Select ramp 3 [20] - selects ramp 3.
Select ramp 4 [21] - selects ramp 4.
Run [22] - issues a start command to the frequency converter.
Run reverse [23] - issues a start reverse command to the frequency converter.
Stop [24] - issues a stop command to the frequency converter.
Qstop [25] - issues a quick stop command to the frequency converter.
Dcstop [26] - issues a DC stop command to the frequency converter.
Coast [27] - the frequency converter coasts immediately. All stop commands including the coast com-
mand stop the Logic Controller.
AF-650 GP Programming Guide