Makita DVC665 Instruction Manual page 8

NOTE: If you want to run the vacuum cleaner along
with the switch operation of the tool connected to the
vacuum cleaner (wireless activation function), set the
stand-by switch to " I (ON)".
NOTE: To use the wireless activation function, finish
the tool registration beforehand. Refer to "WIRELESS
ACTIVATION FUNCTION" section for detail.
NOTE: When using the wireless activation function,
you will not be able to stop the vacuuming by
Hose band
Hose band can be used for holding the hose or free nozzle.
To secure the hose to the vacuum cleaner body, pass
the hose band through the slot on the body. You can
attach the hose band on either side.
► 1 . Hose band 2. Slot 3. Hose
The loop on the lower belt can be used for carrying
nozzles as illustrated.
2
► 1 . Loop 2. Nozzles
1
2
3
Dust beating system
Dust goes down when you pull the lever or walk with
wearing the cleaner. This system helps the cleaner
maintaining the suction power.
1
button.
► 1 . Lever 2. Filter bag/dust bag 3. Board
NOTE: This function works when the cleaner is
switched off and the filter bag/dust bag contains a
certain amount of dust to touch the board.
ASSEMBLY
CAUTION:
is switched off and the battery cartridge is removed
before carrying out any work on the appliance.
Assembling hose
Insert the hose cuff into the vacuum cleaner body and
turn it clockwise.
1
► 1 . Hose cuff 2. Vacuum cleaner body
8 ENGLISH
Always be sure that the appliance
2
3
1
2