Page 1
1.0 How to: Motor/Gearbox Assembly Replacement Sette 30, Sette 270, Sette 270W, Sette 270Wi Time: 10 min Difficulty: Easy Tools/supplies: Torx 10 Driver (2mm hex key can be used) Parts: Sette Motor/Gearbox Assembly (SKU S056 [110v] - S057 [220v])
Page 2
Note how the wires are safe to touch by routed before removing hand or with pliers the gearbox/motor assembly for easiest reassembly. Remove the (4) screws that fasten the motor/ gearbox assembly to the chassis. www.baratza.com support@baratza.com rev. 5/23/2019...
Page 3
Plug in the motor wires, Match red to red taking care to match the red wire with the red terminal. Re-install the case, hopper, and adjustment ring to return the unit to operation. www.baratza.com support@baratza.com rev. 5/23/2019...
Page 4
See Shim Installation guide for reference. To avoid potentially clogging the unit, we advise grinding at a coarser setting at first. If you encounter any issues, or have any questions about this guide, reach out to support@baratza.com www.baratza.com support@baratza.com rev. 5/23/2019...