Manual Setting The Clock; Settings The Daily Timer (Remote Control Only) - Hitachi AXM920E Instruction Manual

Manual Setting the Clock

Connect the unit to the mains socket. Switch the POWER ON/OFF switch at the left side of
the unit to ON position. The unit will be in STANDBY mode, and display will show "–– : ––".
During standby mode, press and hold the ID3/MEM/C-ADJ. button on the remote
1.
control until the hour digits flash on the display. Alternatively press and hold the ID3/
MEM/C-ADJ. button on the unit for few seconds, and then release the button, the
hour digits will flash on the display.
Press the SKIP/TUNE SEARCH
2.
adjust the hour digits, and then press the ID3/MEM/C-ADJ. button on the unit or the
remote control to confirm. The minute digits will flash on the display.
Press the SKIP/TUNE SEARCH
3.
adjust the minute digits, and then press the ID3/MEM/C-ADJ. button on the unit or
the remote control to confirm. The clock setting is now complete.

Settings the Daily Timer (Remote Control Only)

Press the TIMER button on the remote control repeatedly to select the Timer On
1.
mode. The " " icon will show on the display to indicate that the timer is on.
2. During Timer On mode, press and hold the TIMER button on the remote control until
the display shows "On Timer", and the hour digits flash.
Press the SKIP/TUNE SEARCH
3.
digits, and then press the TIMER button on the remote control to confirm. The minute
digits will flash on the display.
Press the SKIP/TUNE SEARCH
4.
minute digits, and then press the TIMER button on the remote control to confirm.
5. After Timer On is set, the display will show "Off Timer" and the hour digits will flash.
Press the SKIP/TUNE SEARCH
6.
digits, and then press the TIMER button on the remote control to confirm. The minute
digits will flash on the display.
7. Press the SKIP/TUNE SEARCH
minute digits, and then press the TIMER button on the remote control to confirm.
Finally press the SKIP/TUNE SEARCH
8.
FM, CD, iPod, USB, CARD or DAB mode, then press the TIMER button on the remote
control to confirm.
Press the TIMER button on the remote control again, the display will show
9.
"VOLUME-20" and flash. Press the SKIP/TUNE SEARCH
control to adjust the volume. Press the TIMER button on the remote control to
confirm.
10. The Timer setting is now complete.
buttons on the unit or the remote control to
buttons on the unit or the remote control to
buttons on the remote control to adjust the hour
buttons on the remote control to adjust the
buttons on the remote control to adjust the hour
buttons on the remote control to adjust the
buttons on the remote control to select
buttons on the remote
GB
17