Table of Contents
Advertisement
General Operation
Powering ON/OFF
When you first connect the unit to the mains socket. The unit will be in STANDBY mode.
Press the STANDBY button to switch the unit on. The word "HELLO" will scroll across
•
the display.
•
Press the STANDBY button to switch the unit back to standby mode. The words "BYE
BYE" will scroll across the display. The clock will be displayed for a few minutes then
the clock will switch off and the STANDBY button will glow red. The unit will switch
to ECO-Power mode.
•
Disconnect the mains plug from the mains socket if you want to switch the unit off
completely.
ECO-Power Mode
Your unit features an ECO-Power/Standby mode. Press the STANDBY button to switch to
standby mode. To save energy consumption, the clock will not be displayed. If you want to
display the clock during standby mode, you can press the CLOCK button. The clock display
will disappear after 90 seconds. The STANDBY button glows red when the unit is in ECO-
Power mode.
If the unit is idle for more than 15 minutes, it will automatically switch to ECO-Power mode.
Selecting Functions
Turn the FUNCTION dial on the unit or press the FUNCTION button on the remote control
to switch between DISC, USB, TUNER, DOCK, AUX1 and AUX2 modes.
Auto Setting the Clock
In TUNER mode, press and hold the DISPLAY button. The clock will automatically update.
Manual Setting the Clock
Manually setting the clock can be done in STANDBY mode.
In STANDBY mode, press the CLOCK button, 'CLOCK SET' will scroll across the display,
1.
then '24HR' will flash.
Press the VOL + / – to select 24 or 12 hours, then press CLOCK.
2.
Press the VOL + / – to set the hours, then press CLOCK.
3.
Press the VOL + / – to set the minutes, then press CLOCK.
4.
• To exit clock setting mode, press the
• If no buttons are pressed for 90 seconds the unit will exit clock setting mode.
• If your unit is disconnected from the mains supply the clock setting will be lost.
/ PROG button on the remote control.
GB
21
Advertisement
Table of Contents
