Manual Setting The Clock; Settings The Daily Timer (Remote Control Only) - Hitachi AXM860E Instruction Manual

Manual Setting the Clock

Connect the unit to the mains socket. Switch the POWER ON/OFF switch at the rear of
the unit to the on position. The unit will be in STANDBY mode, and the display will show
"00 : 00 : 00".
1. While in standby mode, press and hold the ID3/iPod/MEM/C-ADJ. button until
"24 HOUR" or "12 HOUR" shows on the display.
Press the SKIP/TUNE SEARCH
2.
GB
format, and then press the ID3/iPod/MEM/C-ADJ. button to confirm. The hour digits
will flash on the display.
Press the SKIP/TUNE SEARCH
3.
the ID3/iPod/MEM/C-ADJ. button to confirm. The minute digits will flash on the
display.
4. Press the SKIP/TUNE SEARCH
press the ID3/iPod/MEM/C-ADJ. button to confirm. The clock setting is now complete.

Settings the Daily Timer (Remote Control Only)

To set the Timer for the first time, press the TIMER button on the remote control. The
1.
display will show "ON TIME", and the hour digits will flash.
Press the SKIP/TUNE SEARCH
2.
the TIMER button on the remote control to confirm. The minute digits will flash on the
display.
3. Press the SKIP/TUNE SEARCH
press the TIMER button on the remote control to confirm.
4. After Timer On is set, the display will show "OFF TIME" and the hour digits will flash.
Press the SKIP/TUNE SEARCH
5.
the TIMER button on the remote control to confirm. The minute digits will flash on the
display.
6. Press the SKIP/TUNE SEARCH
press the TIMER button on the remote control to confirm.
Finally press the SKIP/TUNE SEARCH
7.
CARD or DAB mode, then press the TIMER button on the remote control to confirm.
8. The display will show the volume level and flash. Press the SKIP/TUNE SEARCH
buttons to adjust the volume. Press the TIMER button on the remote control to
confirm.
9. The Timer setting is now complete. The setting will show on the display.
10. Press the TIMER button on the remote control once to turn the Timer off. Press the
TIMER button again to turn it on. The " " icon will show on the display to indicate that
the timer is on.
11. Press and hold the TIMER button on the remote control to change the setting. Repeat
steps 2-8 to finish the setting.
• To check the timer setting, press the TIMER button repeatedly on the remote control. The setting
will show on the display.
• If there is no CD, iPod, USB or CARD devices inserted or DAB signal available when the unit turns
on, it will switch to FM radio mode.
16
buttons to choose between 12 hour or 24 hour
buttons to adjust the hour digits, and then press
buttons to adjust the minute digits, and then
buttons to adjust the hour digits, and then press
buttons to adjust the minute digits, and then
buttons to adjust the hour digits, and then press
buttons to adjust the minute digits, and then
buttons to select FM, CD, iPod, USB,