Setting The Clock; Connecting To Other Audio Equipment - Hitachi CX-V3 Instruction Manual

English

SETTING THE CLOCK

From the "Off" mode, the LCD displays the clock time.
1. Press and hold SLEEP button on the remote for five seconds, and the hour digits
begin to flash on the display.
2. Press and
3. Press SLEEP button to confirm. The hour stops flashing and the minutes digits begin
to flash.
4. Press and
5. Press SLEEP button to confirm. The minutes stops flashing and the clock is set.
6. Press SLEEP button on the remote, the clock can be toggled between 12/24 hour
format.
Note:
• The clock displays in 12-hour or 24-hour mode.
• The clock can only be set when the power is off, and unit is in standby mode.
• Press BACKLIGHT button on the remote to illuminate the clock.

CONNECTING TO OTHER AUDIO EQUIPMENT

Caution: Turn off power and disconnect from the mains supply before connection.
• AUX IN - Connects to other audio equipment, including a VCR, video recorder, MP3
to provide sound output for other audio equipment.
• AUDIO OUT/LINE OUT - Connects to other audio equipment, including an Active
Subwoofer, TV or an amplifier, for alternative stereo sound. The other jack could be
refered to as CD or AUX on an amplifier; LINE IN on a TV; or AUDIO INPUT on an
amplifier.
Note : Refer to your audio equipment's guide to determine how the audio input or
output port is identified.
• FM Antenna -
1. Plug in supplied FM wire antenna to the FM antenna socket of this unit, fully unwind
the FM wire antenna and position it for best FM signal reception. OR
2. Connect a FM antenna cable (not supplied) from FM antenna socket of this unit to
your home FM antenna socket.
14
CX V3 English
to set the hour.
to set the minutes.
FM Aux
Antenna In
14
Audio Line
Out Out
14/3/06, 9:48