DNFT-LED Switch Assembly, with magnetic housing assembly
FiguRe 18
Disconnect all wiring prior to welding on the compressor or
Cylinder lubricants
WEAR APPROPRIATE PERSONAL PROTECTIVE EQUIPMENT.
Use the following oil specification as a guide only. Determine
the lubrication requirements, based on the specific
compressor gas analysis, with the oil supplier engineer. .
skid.
Complies with ANSI Z535, ISO 3864, OSHA 1910.145 (f) (9)
P E R S O N A L I N J U R Y
Complies with ANSI Z535, ISO 3864, OSHA 1910.145(f) (5)
F L A M M A B L E
NO OPEN FLAME.
Complies with ANSI Z535, ISO 3864, OSHA 1910.145(f) (7)
Complies with ANSI Z535, ISO 3864, OSHA 1910.145 (f) (9)
H301/302 HSR Compressors | Rev. 2.2 | 85