Component Weights; Frame And Frame Components; Table 25 Approximate Frame And Crosshead Guide Component Weights - GE H301 Series Operating Manual

96 | Chapter 8: Maintenance
Refer to Chapter 3: General
TO AVOID A POTENTIALLY EXPLOSIVE AIR/GAS MIXTURE, THE
ENTIRE GAS SYSTEM MUST BE PURGED WITH GAS PRIOR TO
START UP AND OPERATION AND AFTER PERFORMING ANY

Component Weights

Frame and Frame Components

The following H compressor component weight tables provide approximate
weights, for use when selecting appropriate lifting tools for maintenance activities.
Since actual weights may vary with design changes or optional extras, always use
an appropriate safety factor.
Use a crane to lift the compressor.
Compressor component weights, approximate
Frames, assembled including crankshaft,
crossheads and connecting rods
H302
Crankshaft, without flywheel or coupling adapter
Crankshaft
Crankcase Only
Front Main Bearing Housing
Rear Cover – Oil Pump and Lubricator Drive Assembly
Frame Lube Oil Pump
Connecting Rod Assembly
Crosshead
Distance Piece
Table 2 3 Approximate frame and crosshead guide component weights
Data/Specifications.
E X P L O S I V E
MAINTENANCE..
Complies with ANSI Z535, ISO 3864, OSHA 1910.145 (f) (5)
Weight, lbs. (Kg)
2,000 (907)
Weight, Ibs. (Kg)
69 (31.30)
492 (223.2)
17 (8)
21 (10)
11 (5)
13 (6)
12 (5)
136 (62)