Chapter 3: General Data/Specifications; Frame Specifications; Table 1 Frame Specifications - GE H301 Series Operating Manual

Chapter 3: General Data/Specifications

Frame Specifications

H Series Compressor Frames are available in either 2 or 4 throw configuration.
The table below depicts the 2 throw H Series configuration.
Frame model
General data
Number of throws
Crosshead shoe type
Cylinders series available for mounting
Rated speed, RPM
Minimum speed, RPM
Units of measure
Stroke length
Piston rod diameter
Crankcase mounting surface to the crankshaft center line
Crankshaft drive end diameter
Crankshaft taper of 1.50 inch per foot
Maximum horsepower (KW) per throw
2 throw frame and cylinder weights (average)*, lbs (kg)
Compression
Tension
Total
* Approximate dry weight with cylinders installed.
Frame specifications
Table 1
H301/302
2
Babbitted
30 series
1800
900
Inches (mm)
3.00 (76.20)
1.1250 (28.50)
12.3125 (312.735)
2.7035 (68.669)
1.50 (38.1)
100 (74.57)
2000 (907.184)
Pounds (kg)
10,000 (4536)
10,000 (4536)
20,000 (9072)
H301/302 HSR Compressors | Rev. 2.2 | 21