Makita RT0700C Manual

Easy-to-Customize
Standardized intervals between base plate setting screws enable to
use various Base plates for a wide range of applications.
Trimmer base assembly Offset base plate with
with Square base plate Grip of Plunge base assembly
Convenient for cutting workpiece Convenient for cutting wide
using guide rule, auxiliary wood workpiece
fence
Convenient Tool Bag (option)
Square-shaped tool bag with
standardized size of inner tray enables to
put various items into the bag such as
Guide rail adapter set, Router bit set,
Motor unit, Base assemblies, etc.
Performance Comparison
Note:
1) The test results depend to a great extent on the hardness of materials, etc.
2) The numbers in the bar chart below is relative values when the capacities of Competitor B is
indexed at 100.
Motor unit with Trimmer base assembly
Cut a 1,000mm long groove in Taun at a depth of 6mm using 6mm straight bit.
Work Speed
125
Makita RT0700C
100
Competitor "B"
90
Competitor "P"
110
Competitor "R"
0 50 100
Slow Fast
Plunge base assembly
with Side grip
Convenient for cutting while
applying weight on one of the two
handles of the base
Trimmer
RT0700C
6mm (1/4"), 8mm (3/8")
Double Insulation
Variable Speed
Constant Speed
Soft Start
Dust Collecting
Continuous rating Input 710W
Capacity Collet : 6mm, 8mm or 1/4", 3/8"
No load speed (rpm) 10,000-30,000
Dimensions (L x W x H) 89x89x200mm (3-1/2"x3-1/2"x7-7/8")
Net Weight* 1.8kg (3.9lbs)
Power supply cord 2.5m (8.2ft)
Standard Equipment :
Trimmer Base Assembly, Straight Guide, Collet Cone (2pcs), Wrench (2pcs)
150
*weight according to EPTA-Procedure 01/2003
Items of standard equipment and specifications may vary by country or area.
Makita Corporation
3-11-8 Sumiyoshi-cho, Anjo, Aichi, 446-8502 Japan
PRINTED IN JAPAN BB-BC
4 Different Base Assemblies
for Added Versatility
Grip
Part No. 153489-2
Trimmer base
Tilt base (Option)
411
Offset base (Option)
Trimmer
RT0700C
Plunge base (Option)
Satisfy Professional's Needs