Connect To The Codec; Password Protection Of The Web Interface - Cisco Profile Series Getting Started Manual

Profile Series, Codec C Series and Quick Set C20 / C20 Plus
Contents Introduction
The web interface
The web interface allows for remote administration of the
system.

Connect to the codec

Open a web browser and enter the IP address of the
codec.
How to find the IP address:
To find the IP address, open the System Information page
using the remote control. Navigate to Home > Settings >
System Information.

Password protection of the web interface

In order to access the web interface you must sign in. The
username and password are the same as defined for the
codec. The default username is admin
set.
Read more about password protecting your codec in the
Password protection chapter.
Profile Series, Codec C Series and Quick Set C20/C20 Plus Getting Started Guide TC4.1, Feb 2011.
D14639.03
Copyright © 2010-2011 Cisco Systems, Inc. All rights reserved.
Configure your system
Signing in
with no password
Operating devices The menu system
19
Getting started guide
The web interface The web interface Password protection
1. Enter the IP address
of the codec.
2. Enter the username
and password and
press Sign In.
www.cisco.com