Custom Wallpaper - Cisco Profile Series Getting Started Manual

Profile Series, Codec C Series and Quick Set C20 / C20 Plus
Contents Introduction

Custom wallpaper

If you want the company logo or a custom
picture to be displayed on screen, you may
very well use a custom wallpaper.
NOTE: If your video system has a touch
screen controller, please note that the custom
wall paper applies to the main screen only and
will not appear on the touch screen controller.
When you choose a new predefined
wallpaper on the touch screen, it will appear
on both screens and replace your custom wall
paper.
File format and picture size
The picture file format for the custom
wallpaper is PNG. The maximum size is
1920x1200pixels.
Upload and activate the wallpaper
First you have to upload the wallpaper file
to the codec, then you must activate the
wallpaper.
Profile Series, Codec C Series and Quick Set C20/C20 Plus Getting Started Guide TC4.1, Feb 2011.
D14639.03
Copyright © 2010-2011 Cisco Systems, Inc. All rights reserved.
Configure your system Operating devices
The Wallpaper page
Upload the custom wallpaper file
1. Press Browse... and locate the wallpaper file (.PNG).
2. Press Upload to save the file to the codec.
3. Refresh the web page to see the wallpaper you just
uploaded.
Activate the new wallpaper
1. Move to the Advanced configuration page and
enter wallpaper in the search field. From the drop
down list, select Custom. The new wallpaper will be
displayed on screen.
2. If the new wallpaper does not show on screen, you may
have to toggle once between Wallpaper: None and
Custom to make the change take effect.
The menu system
24
Getting started guide
The web interface The web interface Password protection
www.cisco.com