Cisco Profile Series Getting Started Manual page 8

Profile Series, Codec C Series and Quick Set C20 / C20 Plus
Contents Introduction
8
Password protection of the Administrator settings menu
It is recommended to define a password to protect the Administrator
settings menu. Changing the administrative settings may affect the
behavior of the system and should be done by the system administrator.
NOTE: When you define, or change a password, make sure you keep a
copy of the password in a safe place.
How to set the menu password
1. Go to Settings > Administrator settings > Set menu password.
On the remote control, press the # key to toggle between lower or
upper case characters and numbers: abc/ABC/123.
2. Enter the menu password. The password you enter is hidden; each
character is replaced with a star (*).
3. Select Save to save the changes, or Cancel to leave without saving.
4. Press Home ( ) to exit.
Profile Series, Codec C Series and Quick Set C20/C20 Plus Getting Started Guide TC4.1, Feb 2011.
D14639.03
Copyright © 2010-2011 Cisco Systems, Inc. All rights reserved.
Configure your system Configure your system Operating devices The menu system
8
Getting started guide
The web interface Password protection
www.cisco.com