Yamaha PSR-9000 Owner's Manual page 73

To better understand how trigger level works, let's look at
a specific example — sampling of the phrase "a one and a
two."
In this phrase, "one" and "two" are louder than the other
words.
Since the first "a" is lower than the trigger level, the PSR-
9000 doesn't actually start sampling until the word "one."
If you want the phrase to be sampled from the first word,
the trigger level should be set lower.
With this new trigger level setting, the entire phrase will be
sampled. Be careful, however, not to set the trigger level
too low, or else sampling may start from some accidental
or extraneous sound (such as breathing noises, touching
the microphone, etc.).
Waves & Waveforms
The terms "wave" and "waveform" have distinct meanings in PSR-9000 sampling ter-
minology, as follows:
Wave
A "wave" is the raw audio data created whenever you sample a new sound or import a WAV
or AIFF format wave file. The PSR-9000 WAVE EDIT mode includes functions which allow
you to edit this basic data: e.g. resampling to change the sampling frequency, trimming and
looping, normalization for maximum level and minimum noise, etc.
Waveform
All PSR-9000 waves are contained in a "waveform", which is basically a set of parameters
which define the keyboard range over which the wave or waves it contains will play. A wave-
form can contain one or more waves, and waves can be shared by more than one waveform.
Waves in a waveform can be assigned to different ranges of the keyboard, but they cannot be
layered (i.e. they will not sound simultaneously when a single key is played). The PSR-9000
WAVEFORM EDIT mode lets you add or delete waves from a waveform, and assign the
waves to different keyboard ranges.
Sampling
WAV
Sound
WAVE EDIT
WAVE WAVE
AIFF
WAVE1
WAVE
Sampling start point
Volume
(level)
a one and
Sampling start point
Volume
(level)
a one and
WAVEFORM
WAVE2 WAVE3
Sampling
Trigger level
a two
Time
New trigger
level
a two
Time
73
Reference