Saving Data From Flash Rom To A Disk - Yamaha PSR-9000 Owner's Manual

Saving Data from Flash ROM to a Disk

The data types described below can be saved to a floppy disk, an optional hard disk, or
an optional SCSI device.
The explanations here apply to step #3 of the Basic Procedure on page 127.
Select the data type to be saved.
Select the destination file in the disk.
If an optional hard disk has
been installed or an
optional SCSI device has
been connected, the
appropriate device must be
selected here.
Execute the Save operation by following the on-screen instructions.
Select the
desired group of
data to be saved.
The data types
listed at right can
be set to ON or
OFF as desired.
Set the data type to ON or OFF.
Data types set to ON are saved.
PAGE CONTROL
BACK NEXT
For details on directory file
selection, see page 66.
PAGE CONTROL
BACK NEXT
Disk Operations
SETUP All setup data — see list on
page 178.
EFFECT All User effect data — page
DATA 124.
REGISTRA- All Registration Memory
TION BANK data — page 178.
You can set the individual
banks to ON or OFF.
MULTI PAD All Multi Pad data — page
119.
You can set the individual
banks to ON or OFF.
CUSTOM All Custom Voice data —
VOICE page 80.
You can set the individual
numbers to ON or OFF. If
necessary, use the Wave
save option.
ORGAN All Organ Flutes voice set-
FLUTES tings — page 56.
You can set the individual
numbers to ON or OFF.
CAUTION
• When overwriting an existing
file, all data is saved. This
means that previous data
corresponding to unchecked
(OFF) items will be over-writ-
ten with "empty" data.
• Saving style data can be exe-
cuted via the Style Manager
function (page 62).
Reference
129