Reset The Mobile Hotspot; Reset The Mobile Hotspot From The Mobile Hotspot - NETGEAR AirCard 797S User Manual

Table 2. Connection alerts (Continued)
111 Protocol error, unspecified
256 Invalid Connection ID
258 Invalid PRI NSAPI
259 Invalid Field
260 SNDCP Failure
261 RAB Setup Failure
262 No GPRS Context
263 PDP Establish Max Timeout
264 PDP Activate Max Timeout
265 PDP Modify Max Timeout
266 PDP Inactivate Max Timeout
267 PDP Lower layer Error
268 PDP Duplicate
269 UE RAT Change

Reset the Mobile Hotspot

You can reset the mobile hotspot to the factory settings. This is useful if you forgot your
admin login password for the mobile hotspot web page.
If you reset the mobile hotspot, all of your customizations are lost. If you want to keep
them, save them before doing the reset and restore them afterward. See Back Up and
Restore Mobile Hotspot Settings on page 54.
Note: When you reset the mobile hotspot, any currently connected devices lose access
and must be reconnected after the mobile hotspot restarts.

Reset the Mobile Hotspot From the Mobile Hotspot

Start with the mobile hotspot turned on.
To reset the mobile hotspot directly from the mobile hotspot:
1. Press and hold the Power button for at least 15 seconds.
If Factory Reset via the Power button is enabled, the mobile hotspot enters factory
reset mode and first displays the message, "Shutting down," followed by the message
Troubleshooting
AirCard 797S Mobile Hotspot
82 User Manual