Tuner Operations; Manual Tuning; Listening To The Radio; Automatic Tuning - Yamaha CDX-E100 Owner's Manual

Listening to the radio

You can find radio stations automatically and manually.
AUTO/MAN'L
NATURAL SOUND STEREO RECEIVER RX-E100
DISPLAY MEMORY AUTO/MAN'L
TIME ADJ TIMER
STANDBY/ON PHONES
PRESET/BAND

Automatic tuning

1
Select TUNER by turning INPUT so that the
frequency of a radio station appears in the display.
2
Press PRESET/BAND to select the reception band.
Do not select the preset tuning mode (in which
"PRESET" appears on the display).
3
Press AUTO/MAN'L so that "AUTO" appears in the
display.
4
Press PRESET/ TUNING
frequency) or (For a lower frequency).
5
The unit starts searching for a station.
STEREO AUTO
TUNED
When the unit finds a station, the unit stops searching
and "TUNED" appears on the display.
6
If the located station is not the one you want, repeat
steps 4 and 5 until a station you want is tuned.
Notes
• If automatic tuning search does not find the desired station, try
manual tuning as described next.
• When an FM stereo broadcast with sufficient signal strength is
received, "STEREO" appears on the display and you can listen
to stereo sound.
PRESET/TUNING /
VOLUME
PRESET/BAND PRESET/TUNING
MIN MAX
HOUR PTY SELECT MIN INPUT
BASS TREBLE BALANCE
- + - + L R
INPUT
(For a higher

TUNER OPERATIONS

Manual tuning

1
Follow steps 1 and 2 described in "Automatic
tuning."
2
Press AUTO/MAN'L so that "AUTO" disappears
from the display.
3
Press TUNING
(For a higher frequency) or
(For a lower frequency) to select your desired station.
• Each time you press TUNING
changes step by step.
or , the frequency
E-9