Getting Started; The Remote Control; Battery Replacement - Yamaha CDX-E100 Owner's Manual

The remote control

This remote control controls a whole system: not only
RX-E100 but also CDX-E100. Moreover, a cassette deck
(KX-E100) and MD recorder (MDX-E100) that level up
your system can be operated by it. Operating buttons for
each unit are explained on the pages below:
Receiver, RX-E100:
CD player, CDX-E100:
Cassette deck, KX-E100:
MD recorder, MDX-E100:
Loading the batteries for the remote control
1
Remove the battery compartment cover.
2
Insert 4 batteries into the battery compartment.
3
Replace the battery compartment cover.

Battery replacement

If you find that the remote control must be used closer to
the main unit than usual, the batteries are weak. Replace
batteries with new ones.
p.7
p.18
p.23
p.23

GETTING STARTED

Notes
• Use only AAA, UM-4, R03 batteries for replacement.
• Be sure the polarities are correct. (See the illustration inside
the battery compartment.)
• Remove the batteries if the remote control will not be used for
an extended period of time.
• If batteries leak, dispose of them immediately. Avoid touching
the leaked material or letting it come in contact with clothing,
etc. Clean the battery compartment thoroughly before
installing new batteries.
Remote control operation range
NATURAL SOUND STEREO RECEIVER RX-E100
DISPLAY MEMORY AUTO/MAN'L
TIME ADJ TIMER
STANDBY/ON PHONES
Remote control
sensor
Notes
• There should be no large obstacles between the remote control
and the main unit.
• If the remote control sensor is directly illuminated by strong
lighting (especially an inverter type of fluorescent lamp, etc.),
it might cause the remote control not to work correctly. In this
case, reposition the main unit to avoid direct lighting.
VOLUME
PRESET/BAND PRESET/TUNING
MIN MAX
HOUR MIN
INPUT
BASS TREBLE BALANCE
- + - +
L R
Within approximately
6 m (20 feet)
E-3