SAFETY INSTRUCTIONS CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. • Explanation of Graphical Symbols The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert you to the presence of uninsulated “dangerous voltage”...
Page 3
We Want You Listening For A Lifetime YAMAHA and the Electronic Industries Association’s Consumer Electronics Group want you to get the most out of your equipment by playing it at a safe level. One that lets the sound come through loud and clear without annoying blaring or distortion –...
Page 4
SUPPLIED ACCESSORIES ACCESSOIRES FOURNIS <RX-E100> • Remote control • Télécommande SLEEP TIME RNDM PEAK MODE VOLUME TAPE TUNER PRESET MD REC TAPE MODE DUBBING <CDX-E100> • RCA Pin Cable • Câble de raccordement RCA • After unpacking, check that the following parts are contained. •...
INTRODUCTION Thank you for purchasing this YAMAHA product. We hope it will give you many years of trouble-free enjoyment. For the best performance, read this manual carefully. It will guide you in operating your YAMAHA product. FEATURES <RX-E100> • Minimum RMS Output Power per Channel 40 W + 40 W (6 , 20 - 20,000Hz, 0.1% THD)
The remote control This remote control controls a whole system: not only RX-E100 but also CDX-E100. Moreover, a cassette deck (KX-E100) and MD recorder (MDX-E100) that level up your system can be operated by it. Operating buttons for each unit are explained on the pages below: Receiver, RX-E100: CD player, CDX-E100: p.15...
GETTING STARTED Connecting the speakers Never plug the AC power cord to the wall outlet until all connections are completed. Follow the steps as shown below to connect the system using the supplied cords and accessories. Right speaker FREQUENCY Connect the Speakers. 1 Unscrew the knob.
Connecting the system Connecting RX-E100 and CDX-E100 Connect ‰ to ‰ using the RCA pin cable. Insert the plugs into the jacks of the same colour. Connect RX-E100 and CDX-E100 with the system control cable. The other SYSTEM CONNECTOR of CDX-E100 is for connecting MDX-E100 or KX-E100. Connect the AC power plug of CDX-E100 to AC OUTLET of RX-E100.
Listening to the radio You can find radio stations automatically and manually. AUTO/MAN’L PRESET/TUNING NATURAL SOUND STEREO RECEIVER RX-E100 DISPLAY MEMORY AUTO/MAN'L PRESET/BAND PRESET/TUNING HOUR TIME ADJ TIMER BASS TREBLE STANDBY/ON PHONES PRESET/BAND Automatic tuning Select TUNER by turning INPUT so that the frequency of a radio station appears in the display.
TUNER OPERATIONS Presetting stations The unit can preset station frequencies selected by Automatic tuning or Manual tuning. Up to 40 stations can be stored. With this function, you can select any desired station by pressing the corresponding preset station number. PRESET/TUNING NATURAL SOUND STEREO RECEIVER RX-E100 DISPLAY...
Setting the clock You must set the clock before you use the timer functions. The clock is based on a 24-hour system for Australia and General models, and 12-hour system for US, Canada, and General models. DISPLAY HOUR NATURAL SOUND STEREO RECEIVER RX-E100 DISPLAY MEMORY AUTO/MAN'L...
USING THE BUILT-IN TIMER Before using the timer If you want to use the cassette deck, KX-E100 or the MD Recorder, MDX-E100 for timer play or recording, you must first make the connections as shown in “Connecting the system” on page 5. For details, refer to the instructions supplied with the MDX-E100 or KX-E100.
Sleep timer The unit can be turned off automatically at a selected SLEEP time. SLEEP SLEEP DISP TIME PROG RNDM PEAK TAPE Play the desired sound source. Press SLEEP repeatedly until the desired sleep time appears in the display. Each time you press SLEEP, the sleep time changes as follows: SLEEP 2h00m SLEEP 1h30m...
COMPACT DISC PLAYER OPERATIONS CD playback NATURAL SOUND COMPACT DISC PLAYER CDX-E100 STANDBY/ON STANDBY/ON SLEEP DISP TIME PROG RNDM PEAK TAPE VOLUME TAPE TUNER $/!/›/⁄ PRESET MD REC TAPE REC TAPE MODE START DUBBING To play CDs Press STANDBY/ON to turn on this unit and also RX-E100.
Selecting the time display and CD TEXT You can select any of four time displays by pressing TIME. When you play a CD with CD TEXT, the disc title, artist name, and track name are also displayed. SLEEP DISP TIME PROG RNDM PEAK...
COMPACT DISC PLAYER OPERATIONS Repeat play You can play any desired track or disc repeatedly. Press REP to select the repeat mode. SLEEP TIME RNDM PEAK SINGLE REPEAT The current track is played repeatedly. REPEAT FULL REPEAT The current disc is played repeatedly. •...
To stop program play mode Press &. Note • › or $ can be used during program play to skip to tracks within the program. To check program data Press & to stop program play. Press PROG. Then each time you press › / $, the track number and the program number are displayed in the order of the program.
ADD KX-E100 AND/OR MDX-E100 TO YOUR SYSTEM Operating the cassette deck, KX-E100 and MD recorder, MDX-E100 with the remote control SLEEP TIME RNDM PEAK VOLUME TAPE TUNER PRESET MD REC TAPE REC TAPE MODE DUBBING E-20 MDX-E100 ~ TIME (Same function as DISPLAY on DISP MDX-E100 remote control) Ÿ...
ADD KX-E100 AND/OR MDX-E100 TO YOUR SYSTEM Before recording When you record by using MDX-E100 or KX-E100, you must first make the connections as shown in “Connecting the system” on page 5. For details, refer to the instructions supplied with the MDX-E100 or KX-E100. A source from the component which is connected to the AUX terminal component can be recorded on a tape or MD.
ADD KX-E100 AND/OR MDX-E100 TO YOUR SYSTEM TAPE Programming By specifying the length of the tape, the CD player, CDX-E100 programs tracks or helps you to program tracks so they will fit onto the tape with the least amount of unrecorded space remaining at each end of the tape. There are three ways of programming.
If it cannot be corrected, or if the fault is not listed in the SYMPTOM column, disconnect the power cord and contact your authorized YAMAHA dealer or service center for help. When taking the service, the MDX-E100 or KX-E100 may be needed. For details, contact your authorized YAMAHA dealer or service center.
Page 28
ADDITIONAL INFORMATION SYMPTOM Excessive static in FM broadcasts. Noise increases during stereo broadcasts. Stereo broadcasts are noisy and STEREO indicator blinks on and off. Cannot select preset stations. Buzzing or static during AM broadcasts. AM broadcast sensitivity is poor. Cannot set timer. The unit does not work normally.
<RX-E100> Amplifier section Minimum RMS output power per channel ... 50 W + 50 W (6 1kHz 0.07% THD) ... 40 W + 40 W (6 20 - 20,000Hz 0.1% THD) DIN Standard output power per channel (Europe model) ... 60 W + 60 W (4 1kHz 0.7% THD) Input sensitivity/Impedance CD/TAPE/MD/AUX ...
Page 30
YAMAHA ELECTRONICS (UK) LTD. YAMAHA HOUSE, 200 RICKMANSWORTH ROAD WATFORD, HERTS WD1 7JS, ENGLAND YAMAHA SCANDINAVIA A.B. J A WETTERGRENS GATA 1, BOX 30053, 400 43 VÄSTRA FRÖLUNDA, SWEDEN YAMAHA MUSIC AUSTRALIA PTY, LTD. 17-33 MARKET ST., SOUTH MELBOURNE, 3205 VIC., AUSTRALIA...