Technical Specifications - Hardware - Honeywell CIU 888 Introduction Manual

Enraf TRL/2 Field Bus Card
Distance
Cable Characteristics
Type of Galvanic Isolation
Galvanic Isolation
Electrical
Power Supply
Power Rating
Nominal Start-Up Current
Overall Voltage Category
Cooling System
Battery
Operating System
O/S
Memory
User Interface and I/O
Front Panel Display
User Input
Key Lock Switches
Relay Output
Video Output
Audio Output
Serial Ports
Ethernet Ports
Service Ethernet Port
USB Ports
Environmental
Ambient Temperature
Storage Temperature
Enclosure Classification
Humidity
EMC Class
2 - 4
Technical Specifications and Dimensions
4 km
18 AWG (minimum) with shielded twisted pair, max 4 kms with max 8 multi drop Gauge
connections
Transformer coupled with ground shield
1500 V

2.3 Technical Specifications - Hardware

100-240 Vac, auto ranging (-15% to +10%), 45-65 Hz
Max. 60 VA (35 VA nominal)
60 mA (Fuse: 2A Slow Blow)
Start Up Current is (inrush): 60A @230V
II
2 heat sinks with heat pipe design (no moving parts)
Type 3V, 225mAh, 23mm (for back-up system clock only - 10 years estimated service
time)
Linux Arch version 3.4
4 GB Flash memory (upgradable)
Backlight LCD color display (50 x 38 mm; 320 x 240 pixels) for status and diagnostics
6 switches (, , , , OK and Esc) with LED (ring of light) status indication
2x (for configuration and W&M sealing respectively)
2x DPDT for CIU status (Hot Standby); contact rating: 30VDC,1A
SVGA (future use)
1x std. line out (x Vtt), 3.5 mm mini-jack
2x non-isolated
5x 10/100 Mb on back side (1 for future use)
1x behind front panel - DHCP enabled, auto sensing, 10/100 Mb
1x behind front panel; 2x on back side - default disabled
0 °C to +60 °C (+32 °F to +140 °F)
-20 °C to +85 °C (-40 °F to +185 °F)
Against mechanical impact IP 30 (NEMA 1)
0% to 90% non-condensing
CLASS A
Introduction Manual
CIU 888
Part No.: 4417591_Rev10