Advertisement
14. Install cotter pin, as shown in Figure 14, to
secure dump bucket in down position.
Note: This pin prevents dump bucket from
pivoting, even if dump-release lever is
disengaged.
Cotter Pin
Figure 14. Cotter pin installed on tongue to
secure dump bucket in down position.
Operation
1) Never carry people or animals in cart.
2) Do not allow children to use unless
supervised by an adult.
3) Do not exceed 250 lb. load capacity.
4) Do not attempt to modify cart to increase
load capacity.
5) Do not overinflate tires.
6) Do not allow cart to become top-heavy,
or it could fall over when pulling.
7) Do not park cart on an incline.
8) Do not use cart on roadways.
The following instructions describe how to con-
nect the dump cart to a tow vehicle and how to
use the dump mechanism.
T27708 250 lb. Poly Dump Cart (Mfd. 04/16)
Hitching Dump Cart to Tow Vehicle
To connect your dump cart to the tow hitch of a
vehicle, first remove the cotter pin and hitch pin
from the tongue and bracket (see Figure 15).
Align the holes of the tongue and bracket with the
tow hitch of your towing vehicle, then insert the
hitch pin. Insert the cotter pin into the bottom hole
of the hitch pin to prevent the hitch pin from com-
ing loose while towing.
Hitch Pin
Cotter Pin
Figure 15. Location of hitch pin.
Dumping Cart
To dump the contents of the cart, remove the cot-
ter pin shown in Figure 16, disengage the dump-
release lever, then lift the dump bucket. When
you are finished, lower the dump bucket, secure it
with the cotter pin, and engage the dump-release
lever.
Dump-Release
Lever
Figure 16. Dumping controls for cart.
Cotter Pin
-5-
Advertisement
