Cisco 1100 Series Hardware Installation Manual page 34

Connecting to DC Power
Figure 21: Power Connector Pin-Outs
PIN Number
1
2
3
4
To connect the DC power connections on the terminal gateway, follow these steps:
1 Locate the power connector in the accessory package.
In the connector, the pins from left to right are:
1—Negative DC power connection
2— Negative DC power connection
3— Positive DC power connection
4— Positive DC power connection
Hardware Installation Guide for the Cisco 1100 Terminal Gateway
30
Name
DC In -
DC In -
DC In +
DC In +
Install and Connect the Router
Description
DC Power Negative Input
DC Power Negative Input
DC Power Positive Input
DC Power Positive Input