Invalid Device Code; Parity Alert On Idcw; Multiple Devices; Ca Error - Honeywell 6000 Series Reference Manual

Invalid Device Code
zero device code.
Parity Alert on IDCW
A parity error was detected by the LA on the IDCW.
Invalid Instruction Sequence
not valid instructions for data transfer.
MPG DEVICE ATTENTION.
MPC Device Attention status is an extension of the Attention status for all MPC con-
trollers. It indicates an error condition that may require manual intervention.
Configuration Error
This error condition will occur if the functionality firmware loaded into a controller
does not agree with the configuration switches on the MPC operator panel.
Multiple Devic e s
The controller has detected at least two devices with the same identification number.
Device Number Error
At least one device has an identification number outside the range of legal device
numbers for the subsystem.
CA Error
The CA Operational In (0P1) line is down. (The OPI line indicates the operational
state of the controller adapter. )
Alert EN-l
The CA detected an abnormal condition during a data transfer. It was not a transfer
timing or parity error.
2 ~24 DB3?