Data Corrected; Device Busy; Retries 2'20; Devicein T&Dmode - Honeywell 6000 Series Reference Manual

Table 2-5 (cont). Major Status and Substatus Codes
STATUS CODE
MPC DEVICE DATA ALERT 1011
Transmission Parity Error 000001
Inconsistent Command 000010
Checksum Error 000011
Byte Lockout 000100
EDAC Parity Error 001110
Sector" Size Error 010001
Nonstandard Sector Size 010010
Search Alert "First" 010011
Cyclic Code Error "Not First" 010100
Search Alert "Not First" 010101
Sync Byte Error 010110
Alternate Track Error 010111
EDAC Corr. -- Last Sector 011001
EDAC Corr. -- Not Last Sector 011010
EDAC Corr. — Block Count Limit
011011
EDAC Uncorrectable 011100
EDAC Corr. Short Block 011101
MPC COMMAND REJEC'J.' 1101
Illegal Procedure 000001
Illegal Logical Channel Number 000010
Illegal Suspend 000011
Continue Bit Not Set 000100
Retries
When Automatic Retry is performed by the controller, the binary number coded in the
substatus is the number cf times the retry was performed:
Once a (OOXOOI)
Twice (OOXO 10)
Three Times (OOXO 1 1)
Device in T 8: D Mode
This substatus indicates that the device addressed was in the T&D mode.
Data Corrected
This substatus indicates that the control corrected data on the previous read instruction.
DEVICE BUSY
In response to an instruction, "he Device Busy status indicates that the addressed
storage unit temporarily is not available.
2-20 DB3?