Dell PowerEdge FC830 Owner's Manual page 6

Table 2. Front panel features and indicators—1.8-inch SSD system
Item Indicator, Button, or
Connector
1 SSDs
2 USB management port
3 USB management port or
iDRAC Direct port
4 Management indicator
5 Sled handle
6 Status indicator
7 Sled power-on indicator,
power button
Using USB diskette or USB DVD or CD drives
The sled has USB ports on the front which allows you to connect a USB diskette drive, USB flash drive, USB DVD or CD drive,
keyboard, or mouse device. The USB drives can be used to configure the sled.
To designate the USB diskette drive as the boot drive:
1. Connect the USB drive
2. Restart the system
3. Enter System Setup
4. Set the drive as first in the boot sequence
The USB device is displayed in the Boot Order Setup screen only if it is attached to the system before you run the System
Setup. You can also select the boot device by pressing F11 during system start-up and selecting a boot device for the current
boot sequence.
Indicadores de diagnóstico del panel frontal
Hard drive or SSD indicator patterns
The hard drive or SSD (Solid-State Drives) indicators display different patterns as drive events occur in the system.
NOTE: The sled must have a hard drive or SSD or a hard drive blank installed in each drive bay.
6 Dell PowerEdge FC830 system overview
Icon Description
Sixteen 1.8-inch hot-swappable SAS SSDs.
Enables you to connect USB devices to the sled.
Enables you to connect USB devices to the sled or
provides access to the iDRAC Direct features. For
more information about iDRAC, see the iDRAC
Guide at Dell.com/idracmanuals.
The management indicator glows when the iDRAC
controls the USB connector for management
functions.
Used to slide the sled out of the enclosure.
Indicates the status of the system.
The power-on indicator glows when the sled is
turned on. The power button controls the power
supply output to the system.