Controls & Components - Grizzly G0636X Owner's Manual

Controls &
Components
Front Controls
A. Power Switch: Disables ON/OFF buttons
when key is turned to "0" position. Remove
key to lock switch and prevent unauthorized
use of machine.
IMPORTANT: Locking the power switch with
the key only restricts its function. It is not a
substitute for disconnecting power from the
machine when adjusting or servicing.
B. ON Button: Starts motor only if OFF button is
popped out and power switch is turned to "1"
position.
C. OFF Button: Disables ON button. Enable ON
button by twisting OFF button clockwise.
D. Blade Tension Scale: Allows for easy moni-
toring of blade tension.
E. Blade Tension Handwheel: Tensions blade
in gradual increments.
F. Blade Tracking Window: Allows for easy
monitoring of blade tracking (refer to Page
19).
G. Fence, Rail, and Miter Gauge: Allows for
controlled cutting at various angles.
H. Foot Brake: Cuts power to motor and allows
bandsaw blade to be quickly brought to a
stop.
Rear Controls
I. Guide Post Handwheel and Lock Knob:
Moves blade guide support quickly to the
desired height on the guide post; locks set-
ting (refer to Page 34).
J. Quick Release Blade Tension Lever:
Releases blade tension for quick blade
changes.
K. Blade Tracking Knob and Lock Lever:
Moves and locks blade tracking.
-6-
L. Table Tilt Lock Lever: Locks or unlocks the
table at the current angle.
M. Table Tilt Handwheel: Tilts the table up to
5º to the left or 45º to the right (refer to Page
33).
D
A
E
B
C
Figure 1. Front controls.
I
J
L
Figure 2. Rear controls.
Model G0636X (Mfd. Since 09/18)
F
G
H
K
M